10 pieces. Standard milling bits with staggered tooth system for universal machining of steel with a hardness < 60 HRC, cast iron, stainless steel, special alloys, hard and tough materials (e.g. Hardox) and non-ferrous metals.
ព័ត៌មានផលិតផល
វិញ្ញាបនបត្រ/
ឯកសារ
|
រួមបញ្ចូលទាំង ឈុតផ្លែសំលៀងសមាសធាតុកាបូន ធ្មេញ MX 10 pcs :
1
x
Tungsten carbide bur with MX teeth
MILBIT-CYL-TC-ZYAS-MX-D6-WL18MM
ការពិពណ៌នា:
រាងស៊ីឡាំងមានកាត់ខ្នាយ អង្កត់ផ្ចិតក្បាល: 6 mm ប្រវែងគែមកាត់: 18 mm
Standard milling bit with staggered tooth system for universal machining of steel with a hardness < 60 HRC, cast iron, stainless steel, special alloys, hard and tough materials (e.g. Hardox) and hard non-ferrous metals.
បរិមាណ:
1
x
1
x
Tungsten carbide bur with MX teeth
MILBIT-CYL-TC-ZYAS-MX-D9,6-WL19MM
ការពិពណ៌នា:
រាងស៊ីឡាំងមានកាត់ខ្នាយ អង្កត់ផ្ចិតក្បាល: 9.6 mm ប្រវែងគែមកាត់: 19 mm
Standard milling bit with staggered tooth system for universal machining of steel with a hardness < 60 HRC, cast iron, stainless steel, special alloys, hard and tough materials (e.g. Hardox) and hard non-ferrous metals.
បរិមាណ:
1
x
1
x
Tungsten carbide bur with MX teeth
MILBIT-CYL-TC-WRC-MX-D6-WL18MM
ការពិពណ៌នា:
រាងស៊ីឡាំង អង្កត់ផ្ចិតក្បាល: 6 mm ប្រវែងគែមកាត់: 18 mm
Standard milling bit with staggered tooth system for universal machining of steel with a hardness < 60 HRC, cast iron, stainless steel, special alloys, hard and tough materials (e.g. Hardox) and hard non-ferrous metals.
បរិមាណ:
1
x
1
x
Tungsten carbide bur with MX teeth
MILBIT-CYL-TC-WRC-MX-D9,6-WL19MM
ការពិពណ៌នា:
រាងស៊ីឡាំង អង្កត់ផ្ចិតក្បាល: 9.6 mm ប្រវែងគែមកាត់: 19 mm
Standard milling bit with staggered tooth system for universal machining of steel with a hardness < 60 HRC, cast iron, stainless steel, special alloys, hard and tough materials (e.g. Hardox) and hard non-ferrous metals.
បរិមាណ:
1
x
1
x
Tungsten carbide bur with MX teeth
MILBIT-CYL-TC-KUD-MX-D6-WL4,7MM
ការពិពណ៌នា:
រាងបាល់ អង្កត់ផ្ចិតក្បាល: 6 mm ប្រវែងគែមកាត់: 4.7 mm
Standard milling bit with staggered tooth system for universal machining of steel with a hardness < 60 HRC, cast iron, stainless steel, special alloys, hard and tough materials (e.g. Hardox) and hard non-ferrous metals.
បរិមាណ:
1
x
1
x
Tungsten carbide bur with MX teeth
MILBIT-CYL-TC-KUD-MX-D9,6-WL8MM
ការពិពណ៌នា:
រាងបាល់ អង្កត់ផ្ចិតក្បាល: 9.6 mm ប្រវែងគែមកាត់: 8 mm
Standard milling bit with staggered tooth system for universal machining of steel with a hardness < 60 HRC, cast iron, stainless steel, special alloys, hard and tough materials (e.g. Hardox) and hard non-ferrous metals.
បរិមាណ:
1
x
1
x
Tungsten carbide bur with MX teeth
CTR-CYL-TC-TRE-MX-D12-WL21MM
ការពិពណ៌នា:
រូបជាដំណក់ អង្កត់ផ្ចិតក្បាល: 12 mm ប្រវែងគែមកាត់: 21 mm
Standard milling bit with staggered tooth system for universal machining of steel with a hardness < 60 HRC, cast iron, stainless steel, special alloys, hard and tough materials (e.g. Hardox) and hard non-ferrous metals.
បរិមាណ:
1
x
1
x
Tungsten carbide bur with MX teeth
MILBIT-CYL-TC-H-MX-D12-WL30MM
ការពិពណ៌នា:
ការរៀបចំអណ្តាតភ្លើង អង្កត់ផ្ចិតក្បាល: 12 mm ប្រវែងគែមកាត់: 30 mm
Standard milling bit with staggered tooth system for universal machining of steel with a hardness < 60 HRC, cast iron, stainless steel, special alloys, hard and tough materials (e.g. Hardox) and hard non-ferrous metals.
បរិមាណ:
1
x
1
x
Tungsten carbide bur with MX teeth
MILBIT-CYL-TC-SPG-MX-D6-WL18MM
ការពិពណ៌នា:
រូបកោងកំពូលស្រួច អង្កត់ផ្ចិតក្បាល: 6 mm ប្រវែងគែមកាត់: 18 mm
Standard milling bit with staggered tooth system for universal machining of steel with a hardness < 60 HRC, cast iron, stainless steel, special alloys, hard and tough materials (e.g. Hardox) and hard non-ferrous metals.
បរិមាណ:
1
x
1
x
Tungsten carbide bur with MX teeth
MILBIT-CYL-TC-SPG-MX-D9,6-WL19MM
ការពិពណ៌នា:
រូបកោងកំពូលស្រួច អង្កត់ផ្ចិតក្បាល: 9.6 mm ប្រវែងគែមកាត់: 19 mm
Standard milling bit with staggered tooth system for universal machining of steel with a hardness < 60 HRC, cast iron, stainless steel, special alloys, hard and tough materials (e.g. Hardox) and hard non-ferrous metals.
បរិមាណ:
1
x
ឯកតាវេចខ្ចប់បញ្ជាក់ពីចំនួនទំនិញក្នុងកញ្ចប់មួយ។ នៅក្នុងផ្នែកកាតាឡុកអ្នកអាចជ្រើសរើសរវាងឯកតាវេចខ្ចប់ផ្សេងគ្នាប្រសិនបើម៉ឺនុយជ្រើសរើសត្រូវបានបង្ហាញ។
ប្រសិនបើអ្នកមិនដឹងឯកតាវេចខ្ចប់ នៅពេលបញ្ចូលលេខទំនិញដោយផ្ទាល់នៅក្នុងរទេះរឺក៏ការចាប់យកទំនិញតាមរយៈ EasyScan/VarioScan គ្រាន់តែទុកចន្លោះទទេ។ ក្នុងករណីនេះ ឯកតាវេចខ្ចប់នឹងត្រូវបានកំណត់ដោយស្វ័យប្រវត្តិ។
លេខអត្ថបទត្រូវបានបង្កើតដូចខាងក្រោម: VVVVAAABBB
VVVV = 4 ខ្ទង់សម្រាប់លេខបុព្វបទ (សូមចំណាំថាខ្ទង់ទីមួយគឺតែងតែ 0)
AAA = 3 ខ្ទង់សម្រាប់ផ្នែកវិមាត្រ 1
BBB = 3 ខ្ទង់សម្រាប់ផ្នែកវិមាត្រ 2
ឧទាហរណ៍រចនាសម្ព័ន្ធលេខអត្ថបទ:
ឧទាហរណ៍ 1: ខ្នាតខ្ចៅ 4 x 10 មីលីម៉ែត្រ:
VVVVAAABBB
00574 10 (ចន្លោះពីររវាង 4 និង 10)
ឧទាហរណ៍ 2: ខ្នាតខ្ចៅ 10 x 20 មីលីម៉ែត្រ:
VVVVAAABBB
005710 20 (ចន្លោះរវាង 10 និង 20)
ឧទាហរណ៍ 3: វ៉ោសឺរដែលមានអង្កត់ផ្ចិតខាងក្នុង 6 មីលីម៉ែត្រ:
VVVVAAABBB
04076
តំលៃក្នុងមួយកញ្ចប់ (PU):
តម្លៃដែលបង្ហាញតែងតែទាក់ទងទៅនឹងការវេចខ្ចប់ដែលបង្ហាញដូច្នេះតម្លៃ 250 ឯកតាត្រូវបានបង្ហាញសម្រាប់ PU 250 ហើយនិងតំលៃសម្រាប់ 300 ឯកតាសម្រាប់ PU 300 ។
តម្លៃដែលមានការកំណត់តម្លៃសំខាន់:
តំលៃតែងតែអនុវត្តទៅនឹងបរិមាណដែលមានបញ្ញត្តិតាមលេខកូដតម្លៃសំខាន់:
តំលៃ 1 ឯកតា
តម្លៃ 100 ឯកតា
តម្លៃ 1000 ឯកតា
បរិមាណបង្ហាញពីចំនួនឯកតានៅក្នុងការបញ្ជាទិញ ឬការដឹកជញ្ជូន និងឯកតាបរិមាណនៃទំនិញនីមួយៗ។